Automotive Applications

Cincinnati Automation has inspected a wide range of parts in the automotive industry.  Located strategically in the Rust Belt, Cincinnati Automation has been surrounded by automotive companies since our founding and thus has extensive experience with a multitude of parts and part types in this industry.  Below are many examples of projects involving the inspection of automotive parts as well as a listing of some parts inspected.

List of Automotive Products Inspected »

Haze and Clarity Detection with Bracket Gaging System

Haze and Clarity Detection with Bracket Gaging System

A four camera Keyence XG-X vision system with three 5MP cameras and one 21MP camera was used as the inspection system for this unit.
Read More »
   
Auto Hood Latch Assembly & Check

Auto Hood Latch Assembly & Check

Keyence 2MP vision camera verifies the final x-y location of hood latches after automatic assembly by dual computer controlled...
Read More »
   
Auto Seal Inspection & Gaging System

Auto Seal Inspection & Gaging System

Keyence high speed 2MP camera mounted above an LED backlight conveyor programmed to verify correct length and diameter of automotive tube seals...
Read More »
   
Auto Springs

Auto Springs

Color verification system with 2 RBG sensors. The system confirm parts presents, orientation and color of paint dots on auto springs...
Read More »
   
Axles - Heavy Trucks

Axles - Heavy Trucks

Online Cognex vision system verifies presence of correct bolt type & location on axle. This system consists of two single cameras, to confirm correct lug screws...
Read More »
   
Bearings - Automotive

Bearings - Automotive

Electrox laser marking system with automatic servo adjustments for 100s of part sizes. The Automotive Bearing machine consists of an entrance conveyor...
Read More »
   
Brake Assembly

Brake Assembly

Heavy Trucks-EZVision I4C confirms correct hole sizes & locations on hub-slack adjuster angle & cam. This machine was an inspection system which verifies...
Read More »
   
Bushings - Tie-Rods

Bushings - Tie-Rods

EZVision I4c confirms part quality & determines the rotation of bushing in nest for PLC. This machine is an inspection system, which verifies the bushings...
Read More » 
   
Differential Units

Differential Units

Online Cognex vision sensors confirms correct gears and down pin from bar code input. the purpose of this installation is to confirm GM correct gears...                                  Read More »
   
Drive Shaft Run Out

Drive Shaft Run Out

CA integrated 3 Keyence LKG-87 laser displacement sensors into two existing tube forming lines to measure the run out of drive shafts for light trucks...
Read More »
   
Engine Blocks

Engine Blocks

EZVision I2X with robot interface confirms presence and quality of numerous holes in part. The Auto Engine Component Machine consists of a gantry...
Read More » 
   
Frame Number ID - Cars

Frame Number ID - Cars

Online Cognex vision system- OCR determines current frame number-passes to mainframe P. This installation consists of two Cognex Insight cameras...
Read More »
   
Friction Pad Inspection

Friction Pad Inspection

EZVision I4C confirms correct friction pad size & orientation on truck brake assembly. There is a conveyor delivering the part into a two-camera inspection area...                          Read More »
   
Gear Gaging

Gear Gaging

CA designed and built this system to be used to gage ID and OD surfaces of automotive gears. The system utilized a high resolution Cognex Camera with LED...
  Read More »
   
Grommet Assembly, Inspection, & Packing System

Grommet Assembly, Inspection & Packing System

This turnkey system was designed to be used to assemble, inspect, and pack automotive vibration dampening mounts at a rate of 30ppm. Metal inserts were fed...  Read More »
   
Instrument Panels - Cars

Instrument Panels - Cars

EZVision I2X multi camera system confirms printing and features on auto... 
Read More » 
   
Key Sets - Cards

Key Sets - Cars

EZVision I4C locates key set insert logo (x,y, & theata) for SCARA robot...                                  Read More »
   
Mirrors - Auto/Truck Side View

Mirrors - Auto/Truck Side View

EZVision I2X & I4c systems for surface defects-coating defects-distortion & patterns. Five station walking beam conveyor. Each station is approx. 500mm...
Read More » 
   
Muffler Seals & Clamps

Muffler Seals & Clamps

Heavy Trucks-Online DVT vision system and material handling for assembly verification of clamps. This installation consists of one DVT camera, Electrical...
Read More »
   
Plastic Body Side Molding

Plastic Body Side Molding

Online Cognext vision for surface defects & Keyence laser micrometer for part profile. This installation consists of a Cognex Insight camera, and a...
Read More »
   
Stabilizer Bar Assembly & Inspection System

Stabilizer Bar Assembly & Inspection System

This Automated System was designed to assemble and inspect two models of stabilizer bars. Metal clamps were loaded into two nests that had...                                     Read More »
   
Stabilizer Bar - Cars

Stabilizer Bars - Cars

Assembly/Inspection machine with Keyence color verification and laser micrometer for bar. this installation includes an Allen-Bradley control system with...                                  Read More »
   
Threaded Plugs

Threaded Plugs

The purpose of the machine is to inspect various plugs (varying in shape and size) for visible defects using a three Insight 5100 machine vision cameras...
Read More »
   
Transmission Valve Kits

Transmission Valve Kits

Keyence CV5000 series vision controller with a high resolution color camera was used to verify the presence and correct orientation of 69 small transmission...
Read More »
   
Valve Spring Assembly & Inspection System

Valve Spring Assembly & Inspection System

This Automated System was designed to assemble and inspect 2 valve spring seat assemblies per cycle. Seats were fed at 30ppm tp a two-part escapement...
Read More »
   
Valve Spring Length

Valve Spring Length

System utilized a Keyence LS 7000 precision laser micrometer to measure the length and sort 5 different valve springs. The purpose of the machine is to inspect various...
Read More »
   
Vision Guided Robots

Vision Guided Robots

Vision Guided Robots with vision Adept, IAI, Fanuc, Motoman and other brands of robots integrated systems... 
Read More »
   
Window Trim Strips

Window Trim Strips

Online Cognex vision system verifies window seal gap at exit of extrusion machine...  Read More »
 
 
Back to Top`
PRODUCTS
 

Automated Inspection Systems »
General Purpose Inspection
General Purpose Inspection »
Automated Gaging Systems
Automated Gaging Systems »
Robotic Systems
Robotic Inspection Systems »

More Products »
INDUSTRIES SERVED
 
Automobile
Automotive »
Consumer Products
Consumer Products »
Medical
Medical / Pharmaceutical »
General Purpose
General Purpose »
FREE EVALUATION
 
Cincinnati Automation, Ltd. offers a free evaluation of inspection, robotic automation, laser measurement and laser marking projects. If desired, we can provide a budgetary quick quote.

Learn More »
Copyright © 2017. Cincinnati Automation Ltd. All Rights Reserved  | 859-371-5070 | info@cincinnatiautomation.com Facebook  Twitter  Google Plus    Blog