|
Kit Inspection Machine
CA Built an inspection machine for a part kit stored on a tray. This inspection used two cameras, one from a top view, and one from an angled side view, to inspect a tray full of a transmission part kit.
Read More » |
| |
|
|
Paper Cup Bench-Top Inspection Machine
A small, hand loaded table top unit with a touch screen HMI, HD display, and touch button trigger. There is one camera, a Keyence controller, and back lighting.
Read More »
|
| |
|
 |
Auto Seal Inspection & Gaging System
Keyence high speed 2MP camera mounted above an LED backlight conveyor programmed to verify correct length and diameter of automotive tube seals...
Read More » |
| |
|
|
Axles - Heavy Trucks
Online Cognex vision system verifies presence of correct bolt type & location on axle. This system consists of two single cameras, to confirm correct lug screws...
Read More »
|
| |
|
|
Bone Screw Gaging
CA designed, built and programmed this system to be used to gage major, minor diameters, lengths and other features on a range of specialty...
Read More »
|
| |
|
|
Brake Assembly
Heavy Trucks-EZVision I4C confirms correct hole sizes & locations on hub- slack adjuster angle & cam. This machine was an inspection system which verifies...
Read More »
|
| |
|
|
Bushings - Tie-Rods
EZVision I4C confirms part quality & determines the rotation of bushing in nest for PLC. This machine is an inspection system, which verifies the bushings...
Read More »
|
| |
|
|
Can Inspection
Cognex Insight Vision Camera integrated above a packaging line to verify correct can orientation and generally good flange edges prior to filling...
Read More »
|
| |
|
|
Custom Light Boxes
CA provides a wide range of custom light boxes that can be used for manual inspection, image analysis or consumer product visual studies. The boxes range...
Read More » |
| |
|
|
Day / Lot Code
Online EZVision I2X & Cognex vision systems verify correct day/lot codes on parts. The EZVision™ Turn Key System performs the following ...
Read More »
|
| |
|
|
Differential Units
Online Cognex vision sensors confirms correct gears and dowel pin from bar code input. The purpose of this installation is to confirm GM correct gears...
Read More »
|
| |
|
|
Electrical Connector Inspection
Material handling conveyors feed components to an Adept vision guided robot for automated machine loading and unloading to customer pallets...
Read More »
|
| |
|
|
Engine Blocks
EZVision I2X with robot interface confirms presence and quality of numerous holes in part. The Auto Engine Component Machine consists of a gantry...
Read More »
|
| |
|
|
Flash - Improperly Molded Parts
EZVision- Cognex & Keyence vision used to detect flash or improperly molded parts. Machine #578 is an inspection system which verifies correctness...
Read More »
|
| |
|
|
Flexible & Programmable Robotic Inspection System
This very flexible machine can be programmed for a wide range of component parts that may require high resolution machine vision camera inspections...
Read More » |
| |
|
|
Food & Beverage Product, Package Inspection
CA has programmed and integrated several Cognex and Keyence machine vision systems for customers in the food and beverage industry. CA's control...
Read More »
|
| |
|
|
Frame Number ID - Cars
Online Cognex vision system- OCR determines current frame number- passes to mainframe PC. This installation consists of two Cognex Insight cameras...
Read More »
|
| |
|
|
Friction Pad Inspection
EZVision I4C confirms correct friction pad size & orientation on truck brake assembly. There is a conveyor delivering the part into a two-camera inspection area...
Read More »
|
| |
|
|
Grommet Assembly, Inspection & Packing System
This turnkey system was designed to be used to assemble, inspect, and pack automotive vibration dampening mounts at a rate of 30ppm. Metal inserts were fed...
Read More » |
| |
|
|
Harsh Environment Inspection & Gaging System
This system was designed for in-line part inspection and gaging in harsh environments. The inspection system was fully enclosed with 1/4"...
Read More » |
| |
|
|
Kit Inspection System
This system was designed for in-line part inspection and gaging in harsh environments. The inspection system was fully enclosed with 1/4"...
Read More » |
| |
|
|
Large Molded, Stamped or Machined Parts Inspection
This system was designed to be used to inspect and laser gage a wide variety of large molded, stamped, formed or machined parts. It included an...
Read More » |
| |
|
|
Laser Marketing Systems
Electrox- AB- Control and other brands of lasers are integrated with material handling. This system consists of an EZ Vision I4C complete PC based...
Read More » |
| |
|
|
Machine / Not-Machined Surfaces
Cognex & EZVision systems are used to confirm correct machining process on metals. The operator will select the part type through a PanelMate Operator...
Read More » |
| |
|
|
Mirco Connectors
Very High Resolution color camera used to assist assembly and inspection of...
Read More » |
| |
|
|
Molded Parts Inspection & Packing System
This system was designed and integrated into customer's existing injection...
Read More » |
| |
|
|
Muffler Seals & Clamps
Heavy Trucks- Online DVT vision system and material handling for assembly verification of clamps. This installation consists of one DVT camera, Electrical...
Read More » |
| |
|
|
Package Inspection Systems
CA has installed a wide range of Food and Beverage Package Inspection Systems for applications such as label, cap, safety seal, date and lot code...
Read More » |
| |
|
|
Sausage & Meat Inspection
Cincinnati Automation developed a high speed vision system to be used to verify correct count and length of sausages in containers. The color vision...
Read More » |
| |
|
|
Stabilizer Bar Assembly & Inspection System
This Automated System was designed to assemble and inspect two models of stabilizer bars. Metal clamps were loaded into two nests that had...
Read More » |
| |
|
|
Stabilizer Bars - Cars
Assembly/Inspection machine with Keyence color verification and laser micrometer for bar. This installation includes an Allen-Bradley control system with...
Read More » |
| |
|
|
Tapped Holes
This machine utilizes Cognex and EZVision systems to confirm the presence of tapped holes in parts. The operator will select the part type through...
Read More » |
| |
|
|
Threaded Plugs
The purpose of the machine is to inspect various plugs (varying in shape and size) for visible defects using a three Insight 5100 machine vision cameras...
Read More » |
| |
|
|
Transmission Valve Kits
Keyence CV5000 series vision controller with a high resolution color camera was used to verify the presence and correct orientation of 69 small transmission...
Read More » |
| |
|
|
Tube (Run Out) Gaging Machine
Keyence LK-H series high speed laser displacement sensor was used to check run out and diameter on a wide variety (length and OD) of tubes. The laser...
Read More » |
| |
|
|
Valve Spring Assembly & Inspection System
This Automated System was designed to assemble and inspect 2 valve spring seat assemblies per cycle. Seats were fed at 30ppm to a two-part escapement...
Read More » |
| |
|
|
Valve Spring Length
System utilized a Keyence LS 7000 precision laser micrometer to measure the length and sort 5 different valve springs. The purpose of the machine is to inspect various....
Read More » |
| |
|